docs(examples): screening-connection example

iroh/examples/screening-connection.rs

@@ -0,0 +1,148 @@
+//! Very basic example to showcase how to write a protocol that rejects new
+//! connections based on internal state. Useful when you want an endpoint to
+//! stop accepting new connections for some reason only known to the node. Maybe
+//! it's doing a migration, starting up, in a "maintenance mode", or serving
+//! too many connections.
+//!
+//! ## Usage
+//!
+//!     cargo run --example screening-connection --features=examples
+use std::sync::{
+    Arc,
+    atomic::{AtomicU64, Ordering},
+};
+
+use iroh::{
+    Endpoint, NodeAddr, Watcher,
+    endpoint::{Connecting, Connection},
+    protocol::{AcceptError, ProtocolHandler, Router},
+};
+use n0_snafu::{Result, ResultExt};
+
+/// Each protocol is identified by its ALPN string.
+///
+/// The ALPN, or application-layer protocol negotiation, is exchanged in the connection handshake,
+/// and the connection is aborted unless both nodes pass the same bytestring.
+const ALPN: &[u8] = b"iroh-example/screening-connection/0";
+
+#[tokio::main]
+async fn main() -> Result<()> {
+    let router = start_accept_side().await?;
+    let node_addr = router.endpoint().node_addr().initialized().await;
+
+    // call connect three times. connection index 1 will be an odd number, and rejected.
+    connect_side(&node_addr).await?;
+    if let Err(err) = connect_side(&node_addr).await {
+        println!("Error connecting: {}", err);
+    }
+    connect_side(&node_addr).await?;
+
+    // This makes sure the endpoint in the router is closed properly and connections close gracefully
+    router.shutdown().await.e()?;
+
+    Ok(())
+}
+
+async fn connect_side(addr: &NodeAddr) -> Result<()> {
+    let endpoint = Endpoint::builder().discovery_n0().bind().await?;
+
+    // Open a connection to the accepting node
+    let conn = endpoint.connect(addr.clone(), ALPN).await?;
+
+    // Open a bidirectional QUIC stream
+    let (mut send, mut recv) = conn.open_bi().await.e()?;
+
+    // Send some data to be echoed
+    send.write_all(b"Hello, world!").await.e()?;
+
+    // Signal the end of data for this particular stream
+    send.finish().e()?;
+
+    // Receive the echo, but limit reading up to maximum 1000 bytes
+    let response = recv.read_to_end(1000).await.e()?;
+    assert_eq!(&response, b"Hello, world!");
+
+    // Explicitly close the whole connection.
+    conn.close(0u32.into(), b"bye!");
+
+    // The above call only queues a close message to be sent (see how it's not async!).
+    // We need to actually call this to make sure this message is sent out.
+    endpoint.close().await;
+    // If we don't call this, but continue using the endpoint, we then the queued
+    // close call will eventually be picked up and sent.
+    // But always try to wait for endpoint.close().await to go through before dropping
+    // the endpoint to ensure any queued messages are sent through and connections are
+    // closed gracefully.
+    Ok(())
+}
+
+async fn start_accept_side() -> Result<Router> {
+    let endpoint = Endpoint::builder().discovery_n0().bind().await?;
+
+    let echo = ScreenedEcho {
+        conn_attempt_count: Arc::new(AtomicU64::new(0)),
+    };
+
+    // Build our protocol handler and add our protocol, identified by its ALPN, and spawn the node.
+    let router = Router::builder(endpoint).accept(ALPN, echo).spawn();
+
+    Ok(router)
+}
+
+/// This is the same as the echo example, but keeps an internal count of the
+/// number of connections that have been attempted. This is to demonstrate how
+/// to plumb state into the protocol handler
+#[derive(Debug, Clone)]
+struct ScreenedEcho {
+    conn_attempt_count: Arc<AtomicU64>,
+}
+
+impl ProtocolHandler for ScreenedEcho {
+    /// `on_connecting` allows us to intercept a connection as it's being formed,
+    /// which is the right place to cut off a connection as early as possible.
+    /// This is an optional method on the ProtocolHandler trait.
+    async fn on_connecting(&self, connecting: Connecting) -> Result<Connection, AcceptError> {
+        self.conn_attempt_count.fetch_add(1, Ordering::Relaxed);
+        let count = self.conn_attempt_count.load(Ordering::Relaxed);
+
+        // reject every other connection
+        if count % 2 == 0 {
+            println!("rejecting connection");
+            return Err(AcceptError::NotAllowed {});
+        }
+
+        // To allow normal connection construction, await the connecting future & return
+        let conn = connecting.await?;
+        Ok(conn)
+    }
+
+    /// The `accept` method is called for each incoming connection for our ALPN.
+    /// This is the primary place to kick off work in response to a new connection.
+    ///
+    /// The returned future runs on a newly spawned tokio task, so it can run as long as
+    /// the connection lasts.
+    async fn accept(&self, connection: Connection) -> Result<(), AcceptError> {
+        // We can get the remote's node id from the connection.
+        let node_id = connection.remote_node_id()?;
+        println!("accepted connection from {node_id}");
+
+        // Our protocol is a simple request-response protocol, so we expect the
+        // connecting peer to open a single bi-directional stream.
+        let (mut send, mut recv) = connection.accept_bi().await?;
+
+        // Echo any bytes received back directly.
+        // This will keep copying until the sender signals the end of data on the stream.
+        let bytes_sent = tokio::io::copy(&mut recv, &mut send).await?;
+        println!("Copied over {bytes_sent} byte(s)");
+
+        // By calling `finish` on the send stream we signal that we will not send anything
+        // further, which makes the receive stream on the other end terminate.
+        send.finish()?;
+
+        // Wait until the remote closes the connection, which it does once it
+        // received the response.
+        connection.closed().await;
+
+        Ok(())
+    }
+}